Home Feedback Search Online Order CATALOG

International 

+32 (0) 16 58 90 45

+32 (0) 16 50 90 45

France

01 43 25 01 50

01 43 25 01 60

Italy

02 36 00 65 93

02 36 00 65 94

Germany

0241 6085 13140

0241 6085 33033
Up Next


 

 

Capsule filters

 

Capsule Filters
Whether you are conducting research, pilot manufacturing or full-scale production, filtering large volumes or hard-to-filter samples, Whatman has a filtration solution to fit your needs. 

 

We understand that different applications require specific filtration devices for specific needs. It's why we developed a wide range of capsule filtration devices suited to the particular demands of filtering a few to a few hundred liters of liquid. Whatman products are manufactured with the highest quality materials, under exacting clean room conditions using ISO-controlled manufacturing processes. We offer a variety of pore sizes and filter materials to choose from, and all our capsules are free of adhesives to ensure product purity. For the most reliable performance-in any application-trust Whatman's comprehensive line of capsule filtration devices.

Product Navigation

Carbon Cap

Polycap™_AS

Polycap™_GW

Polycap™_HD

Polycap™_SPF

Polycap™_TF

 

 

 

 

Capsule Filters
Carbon cap™
This filter capsule is suitable for adsorption of organics from air and removal of color, organics and chlorine from water. 

 

Carbon Cap is a capsule filter that is filled with high-purity, high-efficiency, acid-washed, granular-activated carbon and a pleated HEPA filter. It is made specially to meet the requirements for continuous column percolation purification processes.

Features and Benefits

  • Carbon acts as an adsorption media
  • Pleated glass microfiber filter structure
  • Retains 99.97% of particles greater than 0.3 µm
  • Large surface area of activated carbon for effective operation
  • Two sizes of capsules available to suit your specific application

Applications

  • Water, chemical and reagent purification
  • Removes noxious odors, oil mists and contaminants
  • Compressed air lines and vacuum pumps
  • Instrument outlet exhausts
  • Eliminates a potential health hazard from the workplace

Flow Chart

 

Technical Specifications
Housing Polypropylene
Filter Media Activated Carbon with a Pleated HEPA Cartridge
Support System Polypropylene
Sealing Heat-fused
Maximum Pressure 60 psi (4.1 Bar)
Surface Area (Activated Carbon) Carbon Cap 75 Capsule: 26,000 m2 ;
Carbon Cap 150 Capsule: 82,000 m2

 

Ordering Information - Carbon Cap™
Catalogue Number Description Quantity/Pack
6704-7500 Carbon Cap 75 1
6704-1500 Carbon Cap 150 1
2022S Carbon Cap 150 Sanitary TC 5
 

 

 

 

Capsule Filters
Polycap™ AS
Polycap AS is a unique product recommended for filtering aqueous solutions. It combines a glass microfiber (GMF) pre-filter and a nylon membrane, prolonging the life of the filter and allowing larger volumes and difficult samples to be filtered easily. 

 

Features and Benefits

  • First layer (GMF) acts as a pre-filter to ensure longer membrane (0.2, 0.45 and 1.0 µm) life and higher filtration efficiency
  • Nylon membrane layer is inherently hydrophilic, has low extractables, is bio-safe and has excellent flow rates
  • Ultra-clean containing no surfactant or mold release agents
  • Bonds thermally fused (no glues, adhesives or extraneous materials)
  • Integrity-testable by bubble point, pressure decay or forward flow methods
  • Provides highly effective filtration area in a small size
  • Autoclavable; some pre-sterilized with gamma radiation
  • Manufactured in clean room facilities under ISO Quality Systems Conditions

Applications

  • Admixtures
  • Biologicals
  • Buffers
  • Cleaning/rinsing solutions
  • Enzymes
  • Extemporaneous solutions
  • Immunologicals
  • Irrigation solutions
  • Ophthalmic solutions
  • Pharmaceutical
  • Reagent preparation
  • Salt solutions
  • Therapy solutions
  • Tissue culture media
  • Nutrients
  • Vins suspensions

Flow Chart

 

Technical Specifications
Housing Polypropylene
Vent On inlet
Pre-filter Glass microfiber double laminated with polyolefin monofilament non-woven
Membrane Nylon
Support System Polypropylene
Sealing Heat-fused
Maximum Pressure 60 psi (4.1 Bar)
Non-Pyrogenic LAL tested, non-reactive
Biosafety Materials pass USP Class VI
Sterilization Capsules are autoclavable at 121°C for 20 minutes (maximum temperature is 132°C).
However, an integrity test should be performed after autoclaving.
Filtration Area 36 mm Capsule: 400 cm2 (62 in2);
75 mm Capsule: 820 cm2 (127 in2);
150 mm Capsule: 1,650 cm2 (256 in2)
Water Bubble Point (Typical) 0.2 µm Membrane: 2.9 Bar (42 psi);
0.45 µm Membrane: 2.1 Bar (30 psi);
1.0 µm Membrane: 0.5 Bar (8 psi)

 

Ordering Information - Polycap™ AS
Catalogue Number Membrane Prefilter1 Pore Size (µm) Connections* Sterile Quantity/ Pack
Inlet Outlet
Polycap 36 AS
6705-3602 Nylon GMF 0.2 SB SB Yes 1
6705-3604 Nylon GMF 0.45 SB SB Yes 1
6705-3610 Nylon GMF 1.0 SB SB Yes 1
6708-3602 Nylon GMF 0.2 1/2" SB 1/2" SB Yes 1
6708-3604 Nylon GMF 0.45 1/2" SB 1/2" SB Yes 1
6709-3602 Nylon GMF 0.2 1/2" HB SB Yes 1
2606T Nylon GMF 0.2 3/8" FNPT 3/8" FNPT No 5
2607NS Nylon GMF 0.45 SB SB No 5
2608NS Nylon GMF 1 SB SB No 5
Polycap 36 AS with Filling Bell
6706-3602 Nylon GMF 0.2 SB SB Yes 1
Polycap 75 AS
6705-7502 Nylon GMF 0.2 SB SB Yes 1
6705-7504 Nylon GMF 0.45 SB SB Yes 1
6705-7510 Nylon GMF 1.0 1/2" SB 1/2" SB Yes 1
6708-7502 Nylon GMF 0.2 1/2" SB 1/2" SB Yes 1
6708-7504 Nylon GMF 0.45 1/2" SB 1/2" SB Yes 1
6709-7502 Nylon GMF 0.2 1/4" MNPT 1/2" SB Yes 1
6709-7504 Nylon GMF 0.45 1/4" MNPT 1/2" SB Yes 1
6705-2705 Nylon GMF 0.2 1.5" Sanitary 1.5" Sanitary No 5
2706T Nylon GMF 0.2 3/8" FNPT 3/8" FNPT No 5
2707NS Nylon GMF 0.45 SB SB No 5
Polycap 75 AS with Filling Bell
6706-7502 Nylon GMF 0.2 SB SB Yes 1
Polycap 150 AS
2806T Nylon GMF 0.2 3/8" FNPT 3/8" FNPT No 5
2806 Nylon GMF 0.2 1/2" SB 1/2" HB Yes 5
2805 Nylon GMF 0.2 1.5" Sanitary 1.5" Sanitary Yes 5
2808 Nylon GMF 1 1/2" SB 1/2" HB Yes 5
1 GMF = Glass microfibre prefilter
* SB: Stepped barb for 6–10 mm 1/4"–3/8" tubing
1/2 SB: Stepped barb for 10–12 mm 3/8"–1/2" tubing
MNPT: Male National Pipe Thread
FNPT: Female National Pipe Thread
HB: Hose barb
 

 

 

Capsule Filters
Polycap™ GW
The U.S. Environmental Protection Agency (EPA) and local Departments for Environmental Protection protocols specify filtering ground water samples with a 0.45 µm filter when analyzing dissolved or suspended metals (EPA Method 3005). Specifically designed with field sampling in mind, the Whatman Polycap Ground Water sampling capsule can be used as a convenient in-line filter unit. 

 

Features and Benefits

  • Connects directly to outlet of a sampling pump
  • Easy to use
  • Filtration membrane is encapsulated in durable polypropylene housing
  • Available in1.0 µm and 5.0 µm filters, as required by some state and regional EPA test methods
  • Large surface area optimized to provide at least 600 cm˛ of effective filtration area to ensure rapid sample collection
  • Housing components thermally fused (no glues, adhesives, metals, epoxies or extraneous materials)
  • Suitable for filtration procedure outlined in EPA Method 3005 for ground water analysis
  • Stepped hose bar fittings allow for connection with various size tubings

Polycap GW Diagram

Applications

  • Filter ground water samples before dissolved metal analysis

 

Technical Specifications
Housing Polypropylene
Filter Media 0.45 µm: PES membrane;
1.0 µm: Poylpropylene Filter;
5.0 µm: Polypropylene Filter
Inlet/Outlet 1/4 to 3/8 in (6–9 mm) Stepped Barb (SB)
Support System Polypropylene
Vent On inlet
Filtration Area 600 cm2 (93 in2)
Wetting Characteristics Hydrophilic
Maximum Pressure 60 psi (4.1 Bar)
Water Flow Rate @ 1.0 bar (14.5 psi) 60 Litres/min
Flow Direction Flow should follow arrows

 

Ordering Information - Polycap™ GW
Catalogue Number Membrane1 Pore Size (µm) Connections* Sterile Quantity/ Pack
Inlet Outlet
6714-6004 PES 0.45 SB SB Yes 1
6703-6010 PP 1.0 SB SB Yes 1
6703-6050 PP 5.0 SB SB Yes 1
ą PES - Polyethersulfone
PP - Polypropylene
* SB: Stepped barb for 6–10 mm 1/4"–3/8" tubing.
 

 

 

 

Capsule Filters
Polycap™ HD
Polycap HD (Heavy Duty) is a well-engineered product that offers high filtration efficiency and excellent filtrate purity because of its materials and methods of manufacture. 

 

Polycap HD provides a unique advantage in process applications as its performance characteristics fit between gross filters and microporous membrane filters used for final filtration.

Features and Benefits

  • 100% polypropylene filter media, support systems and housings allow usage with broad range of solutions, pH and temperature
  • High flow and high retention capacity
  • Materials of construction are FDA approved for food contact
  • Able to be sterilized by autoclaving with steam at 121°C for 20 minutes
  • Manual vent with Luer lock to bleed air from upstream or serve as an injection or sample port
  • Available in 0.2, 0.45, 1.0, 5.0 and 10 µm pore sizes and a variety of end-fitting configurations
  • Manufactured in a Class 10,000 clean room in an ISO certified manufacturing plant

Applications

  • Clean air and gas equipment
  • Cosmetics and personal care products
  • Food and beverage
  • General fine filtration
  • Inks and pigments
  • Pharmaceutical
  • Photographic emulsions and make-up water
  • Pre-filtration for RO/UF/MF membranes
  • Sample preparations
  • Semiconductor and magnetic media
  • Solvents
  • Buffers
  • Reagents

Flow Chart

 

Technical Specifications
Housing Polypropylene
Vent On inlet
Filter Media Polypropylene
Support System Polypropylene
Biosafety Materials pass USP Class VI
Filtration Area 36 mm Capsule: 400 cm2 (62 in2);
75 mm Capsule: 820 cm2 (127 in2);
150 mm Capsule: 1,650 cm2 (256 in2)
Sterilization Capsules autoclavable at 121°C for 20 minutes (maximum temperature is 132°C).
Non-pyrogenic LAL tested, non-reactive
Maximum Pressure 4.1 Bar (60 psi)

 

Ordering Information - Polycap™ HD
Catalogue Number Membrane1 Prefilter Pore Size (µm) Connections* Sterile Quantity/ Pack
Inlet Outlet
Polycap 36 HD
2610T PP No 0.2 3/8"FNPT 3/8"FNPT No 5
2611T PP No 0.45 3/8"FNPT 3/8"FNPT    
6707-3612 PP No 0.45 1/4" MNPT 1/2" HB No 1
6703-3610 PP No 1.0 SB SB No 1
6703-3650 PP No 5.0 SB SB No 1
2612T PP No 5.0 3/8"FNPT 3/8"FNPT No 5
2613T PP No 5.0 3/8"FNPT 3/8"FNPT No 5
6703-3611 PP No 10.0 SB SB No 1
2614T PP No 10.0 3/8"FNPT 3/8"FNPT No 5
6703-3621 PP No 20.0 SB SB No 1
Polycap 75 HD
2710 PP No 0.2 1/2" HB 1/2" HB No 5
2710T PP No 0.2 3/8"FNPT 3/8"FNPT No 5
2711T PP No 0.45 3/8"FNPT 3/8"FNPT No 5
6703-7510 PP No 1.0 1/2" SB 1/2" SB No 1
6703-7550 PP No 5.0 1/2" SB 1/2" SB No 1
2712 PP No 5.0 1/2" HB 1/2" HB No 5
2712M PP No 5.0 1/4" MNPT 1/4" MNPT No 5
2712T PP No 5.0 3/8"FNPT 3/8"FNPT No 5
2713 PP No 5.0 1/2" HB 1/2" HB No 5
2713T PP No 5.0 3/8"FNPT 3/8"FNPT No 5
2714 PP No 10.0 1/2" HB 1/2" HB No 5
2714T PP No 10.0 3/8"FNPT 3/8"FNPT No 5
6703-7511 PP No 10.0 1/2" SB 1/2" SB No 1
6703-7521 PP No 20.0 1/2" SB 1/2" SB No 1
Polycap 150 HD
6703-9502 PP No 0.2 1/2" HB 1/2" HB No 1
2810T PP No 0.2 3/8"FNPT 3/8"FNPT No 5
2811T PP No 0.45 3/8"FNPT 3/8"FNPT No 5
6703-9504 PP No 0.45 1/2" HB 1/2" HB No 1
6703-9510 PP No 1.0 1/2" HB 1/2" HB No 1
2812T PP No 1.0 3/8"FNPT 3/8"FNPT No 5
2813 PP No 5.0 1/2" HB 1/2" HB No 5
2813T PP No 5.0 3/8"FNPT 3/8"FNPT No 5
2814 PP No 10.0 1/2" HB 1/2" HB No 5
2814T PP No 10.0 3/8"FNPT 3/8"FNPT No 5
1 PP = Polypropylene
* SB: Stepped barb for 6–10 mm 1/4"–3/8" tubing
1/2" SB: Stepped barb for 10–12 mm 3/8"–1/2" tubing
HB: Hose Barb
MNPT: Male National Pipe Thread
FNPT: Female National Pipe Thread
 

 

 

 

Capsule Filters
Polycap™ SPF
Polycap SPF (Serum Pre-Filter) is an exceptional product that is optimized for pre-filtration applications and is typically used upstream of a Polycap AS or Polycap PES capsule. 

 

Serum is difficult to filter because it contains a high degree of loading of complex particulates, lipids, triglycerides and lipoproteins that clog filters. When filtering serum without proper pre-filtration, membrane filters clog rapidly.

Features and Benefits

  • Three layers of special media: fine, ultrafine glass microfiber (GMF), and polyethersulfone membrane
  • Ideal for hard-to-filter solutions such as serums and protein solutions
  • Able to be sterilized by autoclaving with steam
  • Manufactured under ISO manufacturing system
  • Suitable for filtering serums, viral suspensions, nutrients, biologicals, immunologicals, enzymes and buffers
  • Prefilters help extend the life of the final filter

Applications

  • Biologicals
  • Buffers
  • Diagnostics standards
  • Enzymes
  • Immunologicals
  • Nutrients
  • Serum prefiltration
  • Tissue culture media
  • Viral suspensions

Flow Chart

 

Technical Specifications
Housing Polypropylene
Vent On inlet
Pre-filter Two layers of glass microfiber
Membrane Polyethersulfone (PES)
Support System Polypropylene
Sealing Heat-fused
Maximum Pressure 60 psi (4.1 Bar)
Sterilization Autoclave at 121°C for 20 minutes (132°C max)
Filtration Area 36 mm Capsule: 260 cm2 (40 in2);
75 mm Capsule: 535 cm2 (83 in2);
150 mm Capsule: 1,100 cm2 (170 in2)

 

Ordering Information - PolyCap™ SPF
Catalogue Number Membrane2 Prefilter1 Pore Size (µm) Connections* Sterile Quantity/ Pack
Inlet Outlet
Polycap 36 SPF
6705-3600 PES GMF 1.0 SB SB No 1
Polycap 75 SPF
6705-7500 PES GMF 1.0 SB SB No 1
Polycap 150 SPF
2820 PES GMF 1.0 1/2" HB 1/2" HB No 5
1GMF = Glass microfibre prefilter
2PES = Polyethersulfone
* SB: Stepped barb for 6–10 mm 1/4"–3/8" tubing.
HB: Hose barb
 

 

 

 

Capsule Filters
Polycap™ TC
Polycap TC/PES, available with and without bell, are disposable, dual layer polyethersulfone (PES) membrane filtration capsules that provide efficient filtration for critical aqueous solutions. 

 

The PES membrane is inherently hydrophilic, has low extractables, is bio-safe, has excellent flow rates and exhibits low protein binding.

Features and Benefits

  • Polycap TC/PES 0.1, 0.2 and 0.8/0.2 µm capsules pass the HIMA Challenge Test for Sterilizing Grade Filters
  • 100% integrity-tested during manufacturing; results are correlated to microbial retention
  • Bonds thermally fused (no surfactants or mold releasing agents)
  • Integrity-testable by bubble point, pressure decay or forward flow methods
  • Available in sterile and non-sterile versions with a filling bell option
  • Manufactured in clean room facilities under ISO Quality Systems
  • PES membrane protein adsorption characteristics:
    HSA 0.4 µg/cm2
    Insulin 2.0 µg/cm2
    Gammaglobulin 1.5 µg/cm2

Applications

  • Aqueous solutions
  • Biologicals
  • Buffers
  • Cleaning rinsing solutions
  • Enzymes
  • High quality water
  • Particle counting solutions
  • Pharmaceutical solutions
  • Reagent preparation
  • Salt solutions
  • Tissue culture media
  • Virus suspensions

Flow Chart

 

Technical Specifications
Housing Polypropylene
Vent On inlet
Membrane Polyethersulfone (PES)
Support System Polypropylene
Sealing Heat-fused
Maximum Pressure 60 psi (4.1 Bar)
Flow Direction If there is a prefilter, it is located on the inlet side and flow should follow arrows.
Non-Pyrogenic LAL tested, non-reactive
Biosafety Materials pass USP Class VI
Sterilization Certain filter devices have been sterilized.* They may be autoclaved once at a minimum of 121°C for 20 minutes (maximum 132°C). However, an integrity test should be performed after autoclaving. [*Sterile and non-sterile options offered.]
Filtration Area 36 mm Capsule: 440 cm2 (72 in2);
75 mm Capsule: 930 cm2 (144 in2);
150 mm Capsule: 1,900 cm2 (302 in2)
Water Bubble Point 0.1 µm > 3.2 Bar (46 psi);
0.2 µm > 2.7 Bar (40 psi);
0.45 µm > 2.1 Bar (30 psi)
(final membrane) 1.0 µm > 1.1 Bar (16 psi)

 

Ordering Information - Polycap™ TC
Catalogue Number Membrane1 Pore Size (µm) Connections* Sterile Quantity/ Pack
Inlet Outlet
Polycap 36 TC
6714-3602 PES 0.2/0.2 SB SB Yes 1
6717-3602 PES 0.2/0.2 1/2" SB 1/2" SB Yes 1
2622NS PES 0.2/0.2 1/2" HB SB No 5
6714-3604 PES 0.65/0.45 SB SB Yes 1
Polycap 36 TC with Bell
6715-3601 PES 0.2/0.1 SB SB Yes 1
6715-3602 PES 0.2/0.2 SB SB Yes 1
6716-3612 PES 0.2/0.2 1/4" MNPT SB Yes 1
6715-3682 PES 0.8/0.2 SB SB Yes 1
6716-3602 PES 0.2/0.2 1/2" HB SB Yes 1
6715-3604 PES 0.65/0.45 SB SB Yes 1
Polycap 75 TC
6714-7501 PES 0.2/0.1 SB SB Yes 1
6714-7502 PES 0.2/0.2 SB SB Yes 1
2742C PES 0.2/0.2 1/2" SB 1/2" SB Yes 5
2742M PES 0.2/0.2 1/4" MNPT 1/4" MNPT No 5
6717-7504 PES 0.65/0.45 1/2" SB 1/2" SB Yes 1
6714-7504 PES 0.65/0.45 SB SB Yes 1
6717-7510 PES 1.0/1.0 1/2" SB 1/2" SB Yes 1
Polycap 75 TC with Bell
6715-7501 PES 0.2/0.1 SB SB Yes 1
6715-7502 PES 0.2/0.2 SB SB Yes 1
6715-7582 PES 0.8/0.2 SB SB Yes 1
6718-7504 PES 0.65/0.45 1/2" SB SB Yes 1
Polycap 150 TC
6717-9501 PES 0.2/0.1 1/2" SB 1/2" SB Yes 1
6717-9502 PES 0.2/0.2 1/2" SB 1/2" SB Yes 1
6704-9502 PES 0.2/0.2 1.5" Sanitary 1.5" Sanitary No 5
6717-9504 PES 0.65/0.45 1/2" SB 1/2" SB Yes 1
6717-9510 PES 1.0/1.0 1/2" SB 1/2" SB Yes 1
Polycap 150 TC with Bell
6718-9502 PES 0.2/0.2 1/2" SB SB Yes 1
6718-9582 PES 0.8/0.2 1/2" SB SB Yes 1
1 PES = Polyethersulfone
* SB: Stepped barb for 6–10 mm 1/4"–3/8" tubing
1/2" SB: Stepped barb for 10–12 mm 3/8"–1/2" tubing
MNPT: Male National Pipe Thread
HB: Hose barb
 

 

 

 

Capsule Filters
Polycap™ TF
Polycap TF filter devices are among the finest disposable encapsulated filters. These capsules are made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing and are designed for use with organic solvents and chemically aggressive solutions. 

 

Features and Benefits

  • Resistant to most solvents, autoclavable and integrity-testable
  • Available in 0.05, 0.1, 0.2, 0.45 and 1.0 µm pore sizes
  • 0.05 µm capsules designed for "ultra clean" applications; 1.0 µm used for extended life and filtration of highly contaminated solutions
  • Able to be sterilized by autoclaving with steam or EtO
  • Manufactured under very clean conditions in a Class 10,000 cleanroom and ISO quality system

Applications

  • Venting
  • In-line filtration
  • Isolation
  • Electronics
  • Pharmaceutical
  • Biotech
  • Other uses
  • Laboratory

Flow Chart

 

Technical Specifications
Housing Polypropylene
Membrane PTFE
Vent On inlet
Support System Polypropylene
Sealing Heat-fused
Maximum Pressure 60 psi (4.1 Bar)
Flow Direction Supported bi-directionally. Certain applications may require orientation, i.e., vents.
Reverse flow only for low-pressure applications.
Biosafety Materials pass USP Class VI
Sterilization May be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving. Compatible with EtO sterilization.
Filtration Area 36 mm Capsule: 500 cm2 (77 in2);
75 mm Capsule: 1,000 cm2 (155 in2);
150 mm Capsule: 2,000 cm2 (310 in2)
Methanol 0.1 µm Membrane: 1.7 Bar (25 psi);
0.2 µm Membrane: 0.9 Bar (13 psi);
Bubble Point 0.45 µm Membrane: 0.5 Bar (7 psi);
1.0 µm Membrane: 0.2 Bar (3 psi)

 

Ordering Information - Polycap™ TF
Catalogue Number Membrane2 Prefilter1 Pore Size (µm) Connections* Sterile Quantity/ Pack
Inlet Outlet
Polycap 36 TF
6700-3602 PTFE — 0.2 SB SB No 1
6700-3610 PTFE PP 1.0 SB SB No 1
6710-3602 PTFE — 0.2 1/2"SB 1/2" SB No 1
6710-3604 PTFE — 0.45 3/8"–1/2" SB 1/2" SB No 1
6711-3601 PTFE — 0.1 1/4" MNPT SB No 1
6711-3602 PTFE — 0.2 1/4" MNPT SB No 1
6711-3604 PTFE — 0.45 1/4" MNPT SB No 1
2601T PTFE — 0.2 3/8" FNPT 3/8" FNPT No 5
2602S PTFE — 0.45 1.5" Sanitary 1.5" Sanitary No 5
2603T PTFE PP 1.0 3/8" FNPT 3/8" FNPT No 5
Polycap 75 TF
6700-7501 PTFE — 0.1 SB SB No 1
6700-7502 PTFE — 0.2 SB SB No 1
6700-7504 PTFE — 0.45 SB SB No 1
6700-7510 PTFE PP 1.0 SB SB No 1
6701-7510 PTFE PP 1.0 1/2" SB 1/2" SB No 1
6710-7502 PTFE — 0.2 1/2" SB 1/2" SB No 1
6710-7504 PTFE — 0.45 1/2" SB 1/2" SB No 1
6711-7502 PTFE — 0.2 1/4" MNPT SB No 1
6711-7504 PTFE — 0.45 1/4" MNPT SB No 1
6711-7505 PTFE — 0.05 1/4" MNPT SB No 1
2700M PTFE — 0.1 1/4" MNPT 1/4" MNPT No 5
2700T PTFE — 0.1 3/8" FNPT 3/8" FNPT No 5
2702M PTFE — 0.2 1/4" MNPT 1/4" MNPT No 5
2702T PTFE — 0.2 3/8" FNPT 3/8" FNPT No 5
2703T PTFE — 0.45 3/8" FNPT 3/8" FNPT No 5
Polycap 150 TF
2800T PTFE — 0.1 3/8" FNPT 3/8" FNPT No 5
2801 PTFE — 0.2 1.5" Sanitary 1.5" Sanitary No 5
2802 PTFE — 0.2 1/2" HB 1/2" HB No 5
2802T PTFE — 0.2 3/8" FNPT 3/8" FNPT No 5
2803T PTFE — 0.45 3/8" FNPT 3/8" FNPT No 5
2804T PTFE PP 1.0 3/8" FNPT 3/8" FNPT No 5
1PP = Polypropylene prefilter
˛ PTFE = Polytetrafluoroethylene
* SB: Stepped barb for 6–10 mm 1/4"–3/8" tubing
1/2" SB: Stepped barb for 10–12 mm 3/8"–1/2" tubing
MNPT: Male National Pipe Thread
FNPT: Female National Pipe Thread
 

 

 

 

For more information :: Bioxys and Gentaur BVBA :: Av. de l'Armée 68 B4 :: BE-1040 BELGIUM

Email: info@gentaur.com
 

International 

+32 (0) 16 58 90 45

+32 (0) 16 50 90 45

France

01 43 25 01 50

01 43 25 01 60

Italy

02 36 00 65 93

02 36 00 65 94

Germany

0241 6085 13140

0241 6085 33033
Send mail to webmaster with questions or comments about this web site.
Copyright © 2005 Gentaur BVBA
Last modified: feb-07