|
| |
Accessories
Biomek and liquid
handling system accessories
BugStopper microplate capmat
Flexible capmats
Lids
Seals
UniVac™ vacuum manifolds
VacAssist™ vacuum assist frame
|
 |
 |
|
|
|
> Adapter
collars for biomek 2000 |
|
Biomek™
and liquid handling system accessories
Designed specifically for the Biomek™ 2000 and F/X liquid
handling systems from Beckman-Coulter™, Whatman Adapter Collars
eliminate many of the problems common to generic vacuum systems
such as cross contamination, unnecessary collection steps and
the need for spacer plates.
The adapter collars are offered in two sizes to accommodate
the wide range of Whatman specialty filter and collection
plates-small, to enable collection into standard 300 µL
collection and filter plates (~14 mm high), and medium, to
accommodate collection into 800 µL collection and filter plates
(~30 mm high). Chemically resistant and easy to install, Whatman
Adapter Collars ensure quality is maintained in a wide range of
high throughput applications. When vacuuming to waste during
wash steps, the 96 well Filtrate Director assures crosstalk-free
filtration by isolating the flow from each well without
collecting it.
| Ordering Information
- Biomek® Accessories |
| Catalogue Number |
Description |
Quantity/Case |
| 7705-0120 |
Small Whatman Collar |
1 |
| 7705-0121 |
Medium Whatman Collar |
1 |
| 7725-0118 |
96 Well Filtrate Director |
25 |
| Protocol* |
PCR Cleanup 96-Biomek Protocol
CD |
1 |
| Protocol* |
Plasmid Miniprep 96-Biomek
Protocol CD |
1 |
* Note: Downloadable protocols are available at www. whatman.com
(click on Technical Support and on Protocols).
CD-ROMs may be obtained from Technical Support (1-800-922-0361).
|
|
| |
 |
|
|
|
| > BugStopper microplate
capmat |
|
BugStopper™ microplate capmat
Whatman BugStopper™ Capmats provide a simple and reliable method for
venting cultures being grown in a 24 well microplate. This reusable
sterile closure, which is produced using chemically resistant biosafe
silicone rubber, incorporates hydrophobic microfilters which provide an
ideal vent for each well.
More efficient than plastic lids, test comparisons confirm that
BugStopper Capmats improve cell growth and significantly reduce
evaporation. The silicone rubber portion of the capmat reseals after
puncture, thus keeping cell cultures sterile during inoculation or
aspiration.
Sterile Venting Closures for Microplate Cultures
- More efficient than plastic lids. Perfect for
extended growth of slow growing bacteria and fungi
- Positive seal for every well. Significantly
reduces evaporation rate and eliminates well-to-well
cross-contamination
- Autoclave and re-use. Cost-effective; repeated
autoclave cycles do not affect gas exchange or retention
capabilities
- Rated 99.9% efficient for bacteria and viruses.
Restricts microorganisms while allowing H2O and CO2
to pass through the membrane
- Prevents aerosol formation. Suitable for growth
of infectious microorganisms
| Ordering Information |
| Catalogue Number |
Well Format |
Item |
Material |
Quantity/Case |
| 7704-0014 |
24 |
BugStopper Venting Capmat for 10 mL
Microplates |
Silicone Rubber |
5 |
| 7701-5102 |
24 |
Growth Plate, 10 mL, round-bottom |
Polypropylene |
25 |
|
| |
Flexible capmats
Whatman flexible capmats individually seal the top of each well. Capmats
may be used on either filter or collection microplates.
| Ordering Information |
| Capmats |
| Catalogue Number |
Well Format |
Capmat Material |
Microplate Compatibility |
Quantity/Case |
| 7704-0004 |
96 |
Square Format EVA |
2 mL microplates |
100 |
| 7704-0005 |
96 |
Round Format EVA |
750 µL and 800 µL microplates |
100 |
| 7704-0006 |
48 |
Rectangular Format EVA |
5 mL microplates |
100 |
| 7704-0007 |
24 |
Square Format Santoprene |
10 mL microplates |
100 |
| 7704-0015 |
384 |
Square Format Santoprene |
400 µL microplate |
100 |
| Pierceable Capmats |
| 7704-0104 |
96 |
Square Format Silicone |
2 mL microplates |
50 |
| 7704-0105 |
96 |
Round Format Silicone |
300 µL, 750 µL and 800 µL microplates |
50 |
| 7704-0115 |
384 |
Square Format Silicone |
100 µL and 400 µL microplates |
50 |
| Venting Capmats
(autoclavable) |
| 7704-0014 |
24 |
BugStopper Venting |
10 mL microplates |
5 |
|
| |
Lids
The lids are suitable for using as dust covers and to prevent splashing
or contamination when plates are being moved around the laboratory.
| Ordering Information - Lids |
| Catalogue Number |
Lid Material |
Quantity/Case |
| 7704-1001 |
Clear Polystyrene Universal Lid |
100 |
| 7704-1002 |
Natural Polypropylene Lid |
100 |
|
| |
Seals
Seals are used to control humidity and reduce evaporation of samples.
They prevent spills and contamination. Cold seals are self-sticking with
inert adhesive. Heat seals are available in a clear polypropylene or
aluminium foil. Heat seals are for polypropylene microplates only and
are applied with heat and pressure.
| Ordering Information - Seals |
| Catalogue Number |
Description |
Quantity/Case |
| 7704-0001 |
Clear Polyester Thin Cold Sealing Film,
adhesive backing, 0.05 mm thick |
100 |
| 7704-0009 |
Clear Polypropylene Cold Sealing Film,
adhesive backing, 0.05 mm thick |
100 |
| 7704-0002 |
Aluminium Foil, applied with heat and
pressure |
100 |
| 7704-0003 |
Clear Polypropylene Film, applied with
heat and pressure |
100 |
|
| |
 |
|
|
|
| > UniVac 1 vacuum to
waste manifold |
|
UniVac™
vacuum manifolds
UniVac™ 1 Vacuum to Waste Manifold
The Whatman UniVac 1 is a single station unit that can be used for
evacuating all liquid from a filter plate to waste, when the filtrate is
not required for further analysis.
UniVac 3 Vacuum to Collect Manifold
The Whatman UniVac 3 is a universal filter/collection manifold designed
to hold all the UNIPLATE™ formats from 100 µL to 10 mL.
 |
|
|
|
| > UniVac 3 Vacuum to
Collect Manifold |
|
The specially designed drip directors beneath the UNIFILTER® plate
ensure that the filtrate is directed into the corresponding well of the
receiving UNIPLATE. The UniVac 3 comes complete with vacuum gauge,
regulator and two-way control valve.
| Ordering Information -
UniVac™ Vacuum Manifolds |
| UniVac 1 Vacuum to Waste
Manifold |
| Catalogue Number |
Description |
Quantity/Case |
| 7705-0101 |
Polyurethane vacuum manifold for
filtering to waste |
1 |
| UniVac 3 Vacuum to Collect
Manifold |
| 7705-0102 |
Teflon coated aluminum filter/collect
vacuum manifold for volumes from 100 µL to 10 mL |
1 |
| 7705-0106 |
Solid Teflon filter/collect vacuum
manifold for volumes from 100 µL to 10 mL |
1 |
| 7705-0107 |
Acrylic filter/collect vacuum manifold
for volumes from 100 µL to 10 mL |
1 |
| 7705-0108 |
Replacement Viton® gaskets for
filter/collect manifold |
5 |
| 7705-0109 |
Replacement Viton o-rings for
filter/collect manifold |
5 |
|
|
+32 (0) 16
58 90 45 
+32 (0) 16
50 90 45
